Used Tool-Temp portable hot oil heater units for sale

We buy used Tool-Temp temperature control units!

Common models of Tool-Temp hot oil temperature control units include: TT-248 Series, TT-288 Series, TT-388 Series, TT-508X Series, TT-508X Series, TT-510X Series, TT-708Y Series, TT-288/2 Series and TT-388/2 Series. The TT-248 Series is designed to operate thermal oil up to 392 degrees Fahrenheit (200 degrees Celsius). This series can hold up to 2.11 gallons of oil and can produce a flow rate of 26 GPM. The heating capacity comes in 8 KW but can be also be switched to 3 kW or 5 kW. Tool Temp TT-288 Series can operate temperature up to 482 degrees Fahrenheit (200 degrees Celsius) and a heating capacity of 8 kW but can be also be switched to 3 kW or 5 kW and can produce up to 26 gallons per minute. TT-388 Series can operate temperature up to 680 degrees Fahrenheit, (360 degrees Celsius) with heating capacity of 16 kW; can be switched to 8/8kW, 24 kW; can be switched to 8/16/24 kW, 32 kW; can be switched to 8/24/32 kW and 48 kW; can be switched to 8/8/16/16/48 kW. The pump capacity for this series is rated to 26 GPM. The TT-508X series can operate temperature up to 572 degrees Fahrenheit when using Marlotherm SH and up to 482 degrees Fahrenheit when using Thermal Oil. The heating capacity for the TT-508X Series is 48 kW and can be switched in stages 16/16/6 kW. The pump motor size is 5.36 HP and can produce a flow rate of 68.68 GPM. TT- 510X Series is a 96 KW unit that is switchable in stages 16/16/16/16/16/16 KW. Unit can heat temperature up to 572 degrees Fahrenheit, operates with 5.36 HP motor size and produce a flow rate of 68.6 GPM. TT-708Y Series heating capability is 72 kW, 120 kW and 144 kW; switchable. Units can heat temperature up to 572 degrees Fahrenheit using 10 HP motor size and produce a flow rate of 52-132 GPM. TT-288/2 & TT- 388/2 Series are dual units and has the same specifications as the TT-288 or TT-388 Series.

We purchase used Tool-Temp hot oil units including: single zone and dual zone units including: 6kw, 9kw, 12kw, 18kw, 24kw, 36kw, 48kw, 72kw and 96kw units. Die Cast Machinery, LLC specializes in second hand Tool-Temp portable temperature control units; we buy and sell Tool-Temp hot oil units daily. We commonly stock and can supply Tool-Temp temperature control units in the following sizes: 6kw, 9kw, 12kw, 18kw, 24kw, 36kw and 48kw. All of these sizes are available in single and dual zone configurations. Tool-Temp hot oil temperature control units are commonly used in injection molded plastics, extruded plastics, extrusion, blow molding, plastic film, foundry and die casting applications for preheating and maintaining correct tooling temperature; they are extensively used by die casters to maintain die temperatures. They are also used in process industries including food processing, petrochemical, petroleum and pharmaceutical industries.

Common options and features available on temperature control units include single zone, dual zone and three zone configurations; auxiliary cooling circuits, also known as heat exchangers, use factory processed water to cool the heat exchanger to control or regulate the process temperature. Other features include: drain valves, hour meters, visual and audio fault alarms, low level alarm, auto-venting sequences, pressure switches for low pump pressure, process pressure gauges and reversing pumps. Primary voltage options include: 200, 208, 230, 380, 415, 440, 460, 480 and 575 volt (600 volt). Three phase primary power in either 50 hertz or 60 hertz configurations.

When it is time to repair, upgrade, rebuild, retrofit, re-manufacturer, replace or add additional hot oil capacity to your facility why not consider a good used Tool-Temp unit? When you consider the cost to repair or upgrade you existing hot oil or hot water unit often it is much cheaper to buy a good quality used hot oil heater from us. Our prices are often better than buying at eBay or at public auctions; on most units we offer same day shipment. Most of our hot oil units and be viewed under power on YouTube.

Used hot oil units have the benefit of quick delivery and an affordable price. Also, we are happy to take trade-ins in additions to cash purchases of your surplus machinery. If you are broke down and need a pump, valve, controller, heater exchanger, owner’s manual or other spare part we may be able to loan you the spare part, manual or schematic that you need from an existing Tool-Temp unit we have in inventory to help get you out of a production problem. Call us for a price now!

How much does a used Tool-Temp hot oil unit cost?

What is the price of a new Tool-Temp temperature control unit?

What is the value of a used Tool-Temp thermolator?

Call us for a price or use our automated RFQ quote system for a quick quote.

To view other brands and manufacturers of hot oil process temperature control units click on any of the following links:?Mokon,?Sterling Sterlco,?Advantage,?Regloplas,?Conair Thermolator,?AEC ACS Group,?Thermal Care OilTherm,?Budzar Industries,?Chromalox,?Colortronic COT,?Delta T Systems T Series,?Frigel,??Industrial Frigo,?QPC,?Robamat Thermocast,?Heat Exchange and Transfer (HEAT),? Shini USA,?Single Temperiertechnik,?TempTek,?Tool-Temp AG,?Tricool?and? Wittmann. View all?Hot Oil Temperature Control Units (TCU).