Used Robamat Hot Water Model: Thermocast 2212 36 KW (18KW Per Zone) Dual (two) Zone Portable Refrigerated Water Chiller Temperature Control Unit
1 / 5| Status | Available |
|---|---|
| We offer for sale, subject to availability, prior sale and the terms listed below: | |
| Manufacturer | Robamat Hot Water |
| Model | Thermocast 2212 |
| Size | 36 KW (18KW Per Zone) |
| Inventory Number | DCM-5984 |
Robamat Hot Water - Thermocast 2212 36 KW (18KW Per Zone) Dual (two) Zone Portable Refrigerated Water Chiller Temperature Control Unit, Robamat 103 Controls
View Available Temperature Control Units
Questions? Call (847) 360-9170 and mention DCM-5984.
Features & Accessories
- Leak-free pump with magnetic coupling
- Solid-state relay (SSR)
- High Limit Safety Circuit
- Separate Expansion Tank
- Robamat 103 Digital Temperature Controller
Item Specifications for DCM-5984
| US | Metric | |
| Main Heater Power (Zone #1): | 18 kW | 18 kW |
| Pump Motor Size (Zone #1): | 2.0 HP | 1 KW |
| Flow Rate (Zone #1): | 15.8 gallons per minute | 60 liters per minute |
| Connection size/type (Zone #1): | 3/4 inch NPT | 1.81 mm NPT |
| Main Heater Power (Zone #2): | 18 kW | 18 kW |
| Pump Motor Size (Zone #2): | 2 HP | 1 KW |
| Flow Rate (Zone #2): | 15.8 gallons per minute | 60 liters per minute |
| Connection size/type (Zone #2): | 3/4 inch NPT | 1.81 mm NPT |
| Maximum Operating Temperature: | 320 degrees Fahrenheit | 160 degrees C |
| Power Requirements: | 480 volt / 3 phase / 60 cycle | 480 volt / 3 phase / 60 cycle |
| Overall Size (L x W x H): | 16.38 x 56.3 x 40.83 inches | 416 x 1430 x 1037 |
| Weight: | 374 Pounds | 170 kg |
Description
Used, Robamat Hot Water Model Thermocast 2212 36 KW (18KW Per Zone) Dual (two) Zone Portable Refrigerated Water Chiller Temperature Control Unit For_Sale, Features Include: Leak-free pump with magnetic coupling, Solid-state relay (SSR), High Limit Safety Circuit, Separate Expansion Tank, Robamat 103 Digital Temperature Controller, Robamat 103 controls, second Hand, DCM-5984
PURCHASER'S (Buyer's) RESPONSIBILITY AND INDEMNITY: Used machines, equipment or any part thereof, may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It shall be a Purchaser's (Buyer's) responsibility to ensure that any and all merchandise or equipment purchased from Die Cast Machinery, LLC or its affiliates is installed and operated in a proper and safe manner. Purchaser (Buyer) also acknowledges that it may have to install or change guards, safeties, warnings or other components to ensure that the merchandise or machines purchased will conform to all laws, codes, regulations, ordinances, statutes, insurance requirements and industry standards. Purchaser agrees to defend, indemnify and hold harmless Die Cast Machinery, LLC from and against all suits, claims, costs, damages and expenses, including, but not limited to, reasonable attorneys' fees, arising out of, or in connection with, the transportation, purchase, ownership, or use of the merchandise or equipment sold hereunder. Information has been obtained from sources deemed reliable, buyers should avail themselves of the opportunity to inspect the items before purchase.