Used Samsco Model: 600 Series 39 Gallon Per Hour
1 / 6| Status | Sold |
|---|---|
| Manufacturer | Samsco |
| Model | 600 Series |
| Size | 39 Gallon Per Hour |
| Inventory Number | DCM-4358 |
Samsco - 600 Series 39 Gallon Per Hour , Samsco Controls
View Available Waste Water Evaporators
Questions? Call (847) 360-9170 and mention DCM-4358.
Features & Accessories
- Elevated Heat Exchanger Tubes for Easy Clean-Out of Unit and Helps Prevent
- Standard
- Simple Full Function Control Station
- Can be used with
Item Specifications for DCM-4358
| US | Metric | |
| Heat Input Max.: | 395,000 Btu | 395,000 Btu |
| Evaporation Rate (Auto): | 33 gal/hr | 124.9 liter/hr |
| Evaporation Rate (Batch): | 39 gal/hr | 548.8 liter/hr |
| Heat Exchanger: | Schedule 10, 4 inch (Nominal Diameter) | Schedule 10, 10.16 mm (Nominal Diameter) |
| Vent Stack: | 6 inch Diameter | 152 mm Diameter (single wall, galvanized typical) |
| Tank Capacity: | 333 gallons | 1,260 liters |
| Tank Insulation: | 1 inch thick, 250 degrees Fahrenheit | 25.4 mm thick, 121 degrees Celsius |
| Tank Design: | Sloped Bottom | Sloped Bottom |
| Inlet Port: | 1-1/2 inch NPTF with fill standpipe | 1-1/2 inch NPTF with fill standpipe |
| Clean-out Port: | 4 inch NPT Pipe | 4 inch NPT Pipe |
| Power Supply: | 115 volt/15 amp/Single Phase | 115 volt/15 amp/Single Phase |
| Weight: | 800 pounds | 364 Kg |
Documents
Description
Used, Samsco Model 600 Series 39 Gallon Per Hour For_Sale, Features Include: Elevated Heat Exchanger Tubes for Easy Clean-Out of Unit and Helps Prevent, Standard, Simple Full Function Control Station, Can be used with, Samsco controls, second Hand, DCM-4358
PURCHASER'S (Buyer's) RESPONSIBILITY AND INDEMNITY: Used machines, equipment or any part thereof, may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It shall be a Purchaser's (Buyer's) responsibility to ensure that any and all merchandise or equipment purchased from Die Cast Machinery, LLC or its affiliates is installed and operated in a proper and safe manner. Purchaser (Buyer) also acknowledges that it may have to install or change guards, safeties, warnings or other components to ensure that the merchandise or machines purchased will conform to all laws, codes, regulations, ordinances, statutes, insurance requirements and industry standards. Purchaser agrees to defend, indemnify and hold harmless Die Cast Machinery, LLC from and against all suits, claims, costs, damages and expenses, including, but not limited to, reasonable attorneys' fees, arising out of, or in connection with, the transportation, purchase, ownership, or use of the merchandise or equipment sold hereunder. Information has been obtained from sources deemed reliable, buyers should avail themselves of the opportunity to inspect the items before purchase.